1.Wire diameter range: 0.10mm-0.55mm (common wire through is:0.20mm - 0.25mm).
2.Knitted wire mesh hole size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same,width is different).
3.Knitted wire mesh common width: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400, 500 mm, 600mm, etc.
4.Knitted wire mesh surface condition: the flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications)
5.Knitted wire mesh material: Aluminum wire,stainless steel wire, galvanized wire,fibre wire,plastic wire,PP,PC,PE,PVC,etc.
6.Knitted wire mesh application: mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding, for manufacturing a filtration device
7.Knitted wire mesh Specification:
|Standard type||40-100 60-150 105-300 140-400 160-400 200-570|
|High-efficiency type||60-100 80-100 80-150 90-150 150-300 200-400 300-600|
|High-penetration type||20-100 30-150 70-400 100-600 170-560|
|Damping type||33-30 38-40 20-40 26-40 30-40 30-50 48-50 30-60 30-80 50-120|