Sanitary stainless steel 304 or 316L wine,alcohol, oils beverages cartridge micro mesh filter
This filter can be applied for most particles so it is broadly for precision filter and sterilization.
- the filter cylinder is 1core,3core,5core,7core,9core,11core,13core,15core
- the length of folding filter core is 10,20,30,40
- the material of the filter core is PTF,Pplysulfone,nylon,pp,acetyl cellulose
- the diameter of the filter hole is 0.1μm,0.22μm,0.45μm,1μm,3μm,5μm,10μm,30μm,60μm,and it is selective as hydrophilic (suitable for gas) and hydrophilic (suitable for liquid) according to your requirement.
- Adopt to mechanical polishing,material liquid touch area Ra<0.4um,absolute health level of polishing , can select all series electrolytic polishing.
- It can increase the vent hole and dreain hole diameter Effectively , and can connect 8mm pipe.
- Drain valve independent from the exhaust valve thread joint sets and pagoda,operating is more convenient.
- Adopt to hing segmented clamp ,20% higher than an ordinary card hoop pressure,maximum pressure up to 1.0Mpa.
- Supporting feet adopt to strengthening threaded,not easy sliding teeth;Install a adjustable nut at the bottom of the leg , filter's height can be adjustment .
|Model Table||Filter element No||Filter element length||Material of shell||Filter element interface||Connect way||Materail of Seal|
|1 element||5"||304||226||Tri-clamp||Silicone rubber|
|F-GSL||10"||316L||Flat pressing||Flange||Fluorine rubber|