Polished stainless steel 316 filter element filter housing/stainless steel filter housing for sediment polypropylene filter

Polished SS 316 cartridge filter housing/stainless steel filter housing for sediment polypropylene filter, the material is SUS304, 316L to produce sanitary stainless steel pipe fitting, standard quick openand clamp type, or standard flange connector, 10 inch stainless steel water filter housing is polished for filter housingouts

Featured Products

Polished Ss 316 Cartridge Filter Housing/Stainless Steel Filter Housing for Sediment Polypropylene Filter

Polished SS 316 cartridge filter housing/stainless steel filter housing for sediment polypropylene filter, the material is SUS304, 316L to produce sanitary stainless steel pipe fitting, standard quick open
and clamp type, or standard flange connector, 10 inch stainless steel water filter housing is polished for filter housing
outside and inside. 10 inch stainless steel single filter housing 100% through its over-pressure resistant and leakproofness testing for water pressure or air pressure. 



Product Size: (For reference only, pls contact us for more details.)
Polished Ss 316 Cartridge Filter Housing/Stainless Steel Filter Housing for Sediment Polypropylene Filter
Polished Ss 316 Cartridge Filter Housing/Stainless Steel Filter Housing for Sediment Polypropylene Filter
 
Product namePolished SS 316 cartridge filter housing/stainless steel filter housing for sediment polypropylene filter
Filter elements typePP water filter cartridge, string wound water filter cartridge, activated carbon water filter cartridge, Pleated water filter cartridge, stainless steel water filter cartridges,etc.
MaterialSS304/316L 
(Surface wire-drawing or electrolysis polishing)
Length10 inch , 20 inch
Inlet & outlet size1/2" , 3/4" , 1" 
Filter microns0.1-100um 
Under pressure5kg-8kg/0.5-0.8Mpa
Application industryElectronics, Petrifaction, Drinking, Pharmaceuticals, Industrial civil, Oil filtration.
O-ringsNBR , Fluorine rubber ,Teflon
Drain port1/4"
Thickness2mm


Features: 
1.Inlet & outlet size is 1/2", 3/4", 1 inch, easy installation. 
2.Working pressure 8kg/0.8Mpa is supported.
3.Use the tap water pressure to provide power, no power consumption. 
4.Wall-mounted, counter-top, very simple installation.
5.This is suitable for using in the water master switch, 
for the pre filtration system and RO system protection. 
6.Resistance to strong acid and alkali.
7.Low cost, it fits different kind of filter elements. 


Structure: Water filter housing & filter elements
Housing material: 304 or 316L stainless steel, the housing body through inside 
and outside polishing, it meets the sanitary grade. 
Inside with the silicone gasket, it can be applied to cold & hot water temperature,
high pressure resistance, corrosion resistance.


Customized:
Multi-cartridge filter housing: 

Polished Ss 316 Cartridge Filter Housing/Stainless Steel Filter Housing for Sediment Polypropylene Filter

Multi-bag filter housing:
Polished Ss 316 Cartridge Filter Housing/Stainless Steel Filter Housing for Sediment Polypropylene Filter


Different models selection: 
Polished Ss 316 Cartridge Filter Housing/Stainless Steel Filter Housing for Sediment Polypropylene Filter


OEM customized service are available,
Pls clik below "
send" to us your inquiry details. Thank you very much !
 

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours