DLMPES PLEATED MEMBRANCE FILTER(SGS TEST WITH FDA STANDARD

1. Flushed with EUI pure water

2.100% integrity test

3. Bubble point test


General Description

The DLM series-PP Pleated filter cartridge deliver high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media tahe provides removal of particals from 0.1 to 50um. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are made from high purity polypropylene materials for use in critical process application

Applications
Pharmaceutics
Food and beverage
Oil industry



Feature

-- Excellent performance of chemical compatibility
-- Hydrophillc membrane with high flow
-- Non-fiber releasing according to pharmaceutics and food industry requirements
-- Experiencing 100% integrity tested
-- Flushed with ultrapure water
-- FDA compliance material


Outside Diameter: 2.7''(69mm)
Filter media:
Support Layer/Cage/Core/ End caps: Polypropylene (PP)
Seal Material: Silicone, EPDM, NBR, Vilton, Teflon, E-FKM
Removal Rating: 0.1um, 0.22um, 0.45um, 0.5um, 0.8um, 1.2um
Maximum Operating Temperature 80° C
Maximum Differential Pressure: 4.0Bar@25° C.
Maximum Differential Pressure(Reverse Direction): 2.0Bar, 25° C
Maximum temperature sterilization: 5times, 20minutes cycles at 120° C