Coarse Screen Brush (CSB) Filters are an ideal solution for incoming plant water from potentially contaminated open water sources. CSB filters are designed to filter contaminates such as algae, clams, zebra mussels, fish, leaves, etc.
They are compact in size with very high flow capacity. CSB filter configurations are available with wedge-wire, mesh, or perforated screens from 200μ - 4,000μ. The cleaning cycle is initiated by differential pressure or by a timer and cleans the entire screen without interrupting the main flow.
What is an Automatic Filter?
filter is self cleaning and operates on line pressure alone, eliminating the need for an external power source. As water passes through the water filter, the dirt particles are collected on the screen. This causes a drop in water pressure. When the pressure drop reaches a preset level, the cleaning cycle is initiated. The Vacuum Screen Cleaner aggressively suctions the dirt from the inside of the screen and flushes it out the drain.
The backwash cycle is accomplished in seconds without interrupting the main flow.
This technology can be used in cooling water filters, water tank filters, chiller water filters, sugar juice filters, sand filters, well water filters, r/o prefiltration, spray nozzle protection, white water filters, gland seal filters, screen water filters, industrial water filters, automatic strainers, and much much more.
Automatic Brush Strainers combine the advantages of high quality particle removal from different water sources (sewage, reservoirs, rivers, lakes, etc.) with a self-cleaning feature that provides a continuous water supply. The strainers are designed for use in a wide range of industrial, municipal and irrigation applications and are ideal as an automatic pre-strainer to the V-Series filters.
The wedgewire screen is made of 316L stainless steel in order to withstand high dirt load and pressure. Cleaning of the screen is performed once the pressure loss (ΔP) across the filter has reached the pre-set value [up to 0.5 bar (7 psi)].
1.Full automatic electric cleaning device
2.filtration degree :100 micros to 3500 micros
3.simple in cleaning mode.
4.The main parts is made of top carbon steel with corrosive-resistance and longer lifespan,the shell could be also with high corrosive to sea water stainless steel.
5.The electric parts is adopted with excellent quality components, littlle water consumption for backwashing,no more than 1% of the total flowing water.
The filtered liquid gets into the filter from the entrance and into the strainer from the lower plate. The liquid flows from the inner side of the strainer to the outer side and gets out from the filter through the exit of the filter cartridge. The impurity from the backwashing is drained from the drainage entrance.
When the liquid flows from the inner side of the strainer to the outer side, the solid grain was held in the inner side of the strainer. With the increase of the pollutant, the pressure difference between the polluted side and the clean side is also growing. When the pressure difference reaches the set value, the automatic backwashing will start to work.
Max water temperature
65 degree(special requirements could be up to 100 degrees)
Back flushing time
Water consumption for back flushing
Suction type 0.37Kw
carbon shell and resin coating
304, 316 stainless steel (weaving, sintering, this form)
Cast iron surface resin coating
Inlet and outlet diameter
commercial offices and the hotel sector, various benefits for swimming pools and the leisure industry, cooling towers of all sizes, food processing, agricultural and manufacturing industries. We also cover more specialized applications such as mining, water transport and power stations.
The circulated or non-circulated cooling water system, heat exchange system, central air conditioning system and central heating system in the industries like architecture, chemistry, metallurgy, rubber, paper making, light textile, coal and foods, used to protect the cooling equipment, heat exchange device and air conditioner accordingly.