PES pleated filter cartridges
General Description
PES series is constructed of imported polyethersulfone membrane media and non-woven support materials.The materials of cage,core and end caps are polylropylene.Adapotors are thermally welded with media without using any glue on that,so there is no possiility to cause pollution.
Features
-- Excellent performance of chemical compatibility
-- Hydrophilic membrane with high flow.
-- Non-fiber releasing according to pharmaceutics and food industry requirements
-- Experiencing 100% integrity tested
-- FDA compliance material
Applications
-- Pharmaceutics
-- Food and beverage
-- Chemical industry
Specifications
Order Information
For example:
DLMPES-0.22-10-P-E
PES, Rating: 0.22um, Length: 10", 222/Fin, seal material: EPDM
General Description
PES series is constructed of imported polyethersulfone membrane media and non-woven support materials.The materials of cage,core and end caps are polylropylene.Adapotors are thermally welded with media without using any glue on that,so there is no possiility to cause pollution.
Features
-- Excellent performance of chemical compatibility
-- Hydrophilic membrane with high flow.
-- Non-fiber releasing according to pharmaceutics and food industry requirements
-- Experiencing 100% integrity tested
-- FDA compliance material
Applications
-- Pharmaceutics
-- Food and beverage
-- Chemical industry
Specifications
| Media | PES |
| Length | 10", 20", 30", 40" |
| Removal rating: For liquid: | 0.2μm, 0.22μm, 0.45μm, for gas: 0.01μm, 0.02μm |
| Outside diameter | 69mm |
| Maximum operating temperature | 80°C |
| Maximum operating pressure | 4.2bar @25°C |
| Maximum operating pressure(Reverse Direction) | 2.1bar @25°C |
| Maximum temperature sterilization | 121°C every 30 Minutes, 100 times |
| When filter the air, pressure is 2 bar, start pressure 100Mbar, 10"filter can flow 300NM³/h Air Rate vs. Differential Pressure | |
Order Information
For example:
DLMPES-0.22-10-P-E
PES, Rating: 0.22um, Length: 10", 222/Fin, seal material: EPDM